Factory Cheap Hot Rt25 Skid Steer - XCMG Rotary Drilling Rig XR260D – Chengong
Factory Cheap Hot Rt25 Skid Steer - XCMG Rotary Drilling Rig XR260D – Chengong Detail:
Detailed configuration
Adopt imported Cummins turbocharging engine ,
CE standard .Centralized lubricating system .
Advantages
XCMG XR260D rotary drilling rig uses a hydraulic telescopic crawler chassis and a large-diameter slewing ring for rotary drilling rigs to meet superior stability and transportation convenience. The imported electronically controlled turbocharged engine has strong power and emissions meet Euro III emission standards. The hydraulic system uses extreme power control and positive flow control to make the hydraulic system more energy efficient. The single-row rope main hoisting effectively solves the problem of wire rope wear and effectively improves the service life of the wire rope; and the drilling depth detecting device is provided on the main hoist, and the single-layer rope winding makes the depth detection more accurate.
Parameters
| Project | Unit | Parameter |
| Max.Drilling Diameter | ||
| Uncased | (mm) | φ2200 |
| Cased | (mm) | φ1900 |
| Max.Drilling Depth | (m) | 80 |
| Dimension | ||
| Working condition L × W × H | (mm) | 10465×4400×22220 |
| Transportation condition L × W × H | (mm) | 16525×3250×3575 |
| Overall Drilling Weight | (t) | 76 |
| Engine | ||
| Model | - | CUMMINS QSL-325 |
| Rated Power | (kW) | 242/2100 |
| Hydraulic System | ||
| Working pressure | (MPa) | 35 |
| Rotary Drive | ||
| Max. output torque | (kN.m) | 260 |
| Rotary speed | (r/min) | 7~22 |
| Spin off speed | (r/min) | - |
| Pull-Down Cylinder | ||
| Max.pull-down piston push | (kN) | 200 |
| Max.pull-down piston pull | (kN) | 200 |
| Max.pull-down piston stroke | (mm) | 5000 |
| Crowd Winch | ||
| Max.pull-down piston push | (kN) | - |
| Max.pull-down piston pull | (kN) | - |
| Max. pull-down piston stroke | (mm) | - |
| Main Winch | ||
| Max.pulling force | (kN) | 260 |
| Max. single-rope speed | (m/min) | 70 |
| Diameter of the steel wire rope | (mm) | 32 |
| Auxiliary Winch | ||
| Max. Pulling force | (kN) | 80 |
| Max. single-rope speed | (m/min) | 60 |
| Diameter of the steel wire rope | (mm) | 20 |
| Drilling mast | ||
| Left/right inclination of mast | (°) | 42464 |
| Front inclination of mast | (°) | 5 |
| Rotary table slewing angle | (°) | 360 |
| Traveling | ||
| Max. traveling speed | (km/h) | 1.5 |
| Max.grade ability | (%) | 35 |
| Crawler | ||
| Track shoe width | (mm) | 800 |
| Distance between tracks | (mm) | 3250~4400 |
| The length of crawler | (mm) | 4750 |
| Average ground pressure | (kPa) | 100 |
Product detail pictures:
Related Product Guide:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Factory Cheap Hot Rt25 Skid Steer - XCMG Rotary Drilling Rig XR260D – Chengong , The product will supply to all over the world, such as: Lyon, French, Kuwait, We warmly welcome you to come to visit us personally. We hope to establish a long-term friendship based on equality and mutual benefit. If you want to get in touch with us, please do not hesitate to call. We will be your best choice.
By Christina from Juventus - 2017.02.18 15:54
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Ricardo from United Arab Emirates - 2018.05.13 17:00
