GTJZ0808 Scissor Aerial Operation Platform

1. Chassis
Main configurations: two wheel steering, 4×2 drive, auto brake system, auto pothole protective system, traceless solid rubber tires, and manual release of brake
(1) Maximum driving speed at 3.5km/h.
(2) Maximum gradeability at 25%.
(3) The tail of chassis is equipped with standard hole for the transportation of fork.
(3) Auto pit protection system—ensure safety for platform lifting
(4) Traceless solid rubber tires - high payload, steady running and environment friendly
(5) 4×2 driving; the turn wheels are also driving wheels; three driving speed gears; all-travel walking is allowed;
(6) Auto brake system-- the machine brakes when it stops traveling or stops on a slope; besides, an additional hand brake for emergency;
2. Boom
(1) Single luffing cylinder + four sets of scissor type boom
(2) High-strength steel — boom light-weighted and safer;
(3) Matched strength and rigid - make sure the boom is reliable.
(4) Inspecting frame —keeps the inspection safe
3. Work platform
(1) Main platform could have the payload up to 230kg and the sub-platform to 115kg.
(2) Work platform length × width: 2.27 m × 0.81m；
(3) Sub-platform could prolong in one way by 0.9m;
(4) Platform gate self-locked
(5) Platform guard foldable
4. Hydraulic system
(1) Hydraulic elements - hydraulic pump, main valve, hydraulic motor and brake are from the domestic (or international) famous manufacturers
(2) The hydraulic system is driven with the motor-driven gear pump, so as to raise or lower the platform and to run and steer the platform.
(3) The hoisting cylinder is equipped with an emergency lowering valve - making sure the platform could lower to the retraction at steady speed even at accident or electricity cut off.
(4) The lifting cylinder is equipped with the hydraulic lock to ensure the reliable keeping height of work platform after the hydraulic hose is broken.
5. Electric system
(1) The electrical system uses the CAN bus control technology.The chassis is equipped with controller, the platform is fitted with control handle and the communication between the chassis and the platform controller is realized through CAN bus so as to control the action of machine.
(2) The proportional control technologies make each action steady.
(3) Electrical system controls all the actions, including the leftward/rightward steering, the forward/backward traveling, the changeover between high and low speeds and the lifting/lowering of work platform.
(4) Multiple safety and warning methods: tilting protective; inter-locking of handles; automatic pothole protection; auto low-speed protection at high altitude; falling pause for three seconds; heavy-loaded warning system (optional); charging protective system; emergency button; action buzzer, frequency flasher, horn, timer and fault diagnosis system.