New Machine Offical Brand XCMG GR135 135hp Motor Grader

Short Description:

Main parameter:

Operating weight :11 tons

Moldboard : 3660*610mm

 

Detailed configuration

* 6BT5.9 engine

* driving axle

* air conditioner driving cabin

* Imported differential mechanism


Product Detail

Product Tags

Advantages

Strong power ,Comfortable driving environment .

Adopt imported hydraulic parts .Great working performance .

XCMG GR135 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farm- lands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.

 

Advantages :

* GR135 adopt Dongfeng cumm 6BT5.9-C130- II turbocharged diesel engine, Large output torque and power reserve coeficient and low oil consumption.

* Torque converter has big torque coefficient, wide high efficiency area. It has good combination working characteristics with engine. The transmis- sion box has six forward gears, three backward gears, with neutral start protection function, gear shift controlled by electro-hydraulic, flexible operation, shift without impact, reasonable speed ratio distribution, meet the requirements of various working conditions.

* The rear axle adopts balanced suspension to ensure the uniform load of four wheels, which is conducive to the full use of its adhesion ability. The main drive of the rear axle is equipped withNO - SPIN" self-locking differential.

* The front axle is steering axle. The axle can swing from side to side. In addition to the front steering, it also uses the articulated frame, which can further reduce the turning radius.

* The hood is structural part, well shaped with turn over function, the two sides double door is reversible, enhances the maintainability.

Optional Parts

* Front mouldboard

* Rear scarifier

* Shovel blade

Parameters

Basic specification
Engine model 6BT5.9
Rated power/speed 100/2200kw/rpm
Dimension(LxWxH) 8015*2380*3050mm
Operating weight(Standard) 11000kg
Performance specification
Travelling speed ,forward 5813203042km/h
Travelling speed ,reverse 51330km/h
Tractive force(f=0.75) 61.3KN
Max. gradeability 20%
Tire inflation pressure 300kPa
Working hydraulic pressure 16MPa
Transmission pressure 1.31.8MPa
Operating specification
Max. steering angle of front wheels ±49°
Max. lean angle of front wheels ±17°
Max. oscillation angle of front axle ±15°
Max. oscillation angle of balance box 16
Frame articulation angle ±27°
Min. turning radius using articulation 6.6m
Biade
Maximum lift above ground 410mm
Maximum depth of cutting 535mm
Maximum blade position angle 90°
Blade cutting angle 28°—70°
Circle reversing rotation 360°
Moldboard width * height 3660*610mm

  • Previous:
  • Next:

  • Write your message here and send it to us